Skip to main content
Toronto Floor Waxing Services

Floor Waxing Services Toronto

CMG Clean delivers professional floor waxing services for commercial facilities across Toronto and the GTA — from a single floor waxing service to a full program of stripping and waxing floors throughout your building. We restore shine, protect surfaces, and keep your floors looking their professional best.

Floor stripping and waxing: what happens on the night

Floor stripping and waxing in Toronto is usually booked for vinyl composition tile (VCT) and similar resilient floors in schools, clinics, offices and stores. It removes the old, worn finish down to the tile and builds up new coats, which is different from a scrub and recoat or a burnish. This section explains the steps, how often each treatment is needed, and what affects the price.

The steps of a strip and wax

The area is cleared and closed off. A stripping solution loosens the old finish, which is scrubbed off and picked up. The floor is rinsed and neutralized so the new finish bonds, then several thin coats of finish are applied with drying time between each. Furniture goes back only when the last coat has cured enough to walk on.

Strip and wax, scrub and recoat, or burnish

Not every dull floor needs stripping. The right treatment depends on how worn the finish is:

  • Burnishing: a high-speed polish that restores shine to a finish that is still intact
  • Scrub and recoat: removes the top layer of finish and adds fresh coats, without going down to bare tile
  • Full strip and wax: removes all old finish when it is yellowed, built up, or worn through in traffic lanes

Where stripping services are booked most

Schools usually book in summer, clinics and offices over long weekends, and stores between seasons. Commercial floor strip and wax in occupied buildings is done at night or on weekends so the floor can cure undisturbed. Schools can plan it with our school cleaning services, and offices with office cleaning services in Toronto.

What affects the price of floor waxing

Floor waxing services are quoted after we see the floor. The main factors are:

  • Square footage and how open the area is versus how much furniture has to be moved
  • Condition of the existing finish and how many layers have built up
  • Number of coats of new finish
  • Floor type and any areas that cannot be stripped
  • Night or weekend timing, and whether the work is split over several visits

Keeping the finish longer

Regular dust mopping, entrance matting and damp mopping with a neutral cleaner make a new finish last longer, especially in winter when salt is tracked in. Many sites combine a yearly strip and wax with a nightly routine from commercial cleaning in Toronto.

500+
Floors Restored
20+
Years Experience
4.9/5
Customer Rating
24/7
Availability

Why Choose CMG Clean for Floor Waxing

Toronto's commercial floor care specialists — trusted by businesses across the GTA since 2004.

A Coat That Saves the Floor

Wax is the sacrificial layer that takes the foot traffic, salt, scuffs, and grit so the tile underneath does not. Keeping it built up adds years to a Toronto commercial floor before it needs replacing.

Wet-Look Gloss That Lasts

A freshly stripped, waxed, and burnished floor reads clean and cared-for the moment anyone walks in — the kind of first impression that lifts a Toronto retail floor, office, or clinic.

Every Hard-Floor Surface

VCT, sheet vinyl, linoleum, sealed concrete, hardwood, marble, terrazzo, and stone all want different chemistry and pads. We match the method to the surface on every Toronto commercial floor.

Insured, Bonded & Vetted

Every floor waxing job in Toronto is handled by trained, police-checked technicians carrying full insurance and bonding — the reassurance you want for crews working in your space after hours.

Dry by Opening

Strip-and-wax needs the floor closed while coats cure, so we work it overnight and on weekends, 24/7. Your Toronto store, office, or clinic opens the next morning on a fully dried, ready floor.

Low-Odour, Green-Certified

Our strippers and finishes are green-certified and chosen to keep odour down — important in medical and office settings where staff return to a Toronto floor the same day it was coated.

Floor Stripping, Waxing & Polishing in Toronto

Commercial floor waxing in Toronto is one of the highest-impact maintenance services a business can invest in. A freshly stripped and waxed floor transforms the look of any commercial space — projecting professionalism to clients and visitors while simultaneously protecting the floor surface from the scratches, scuffs, and moisture damage that shorten floor life and lead to costly replacement. CMG Clean has been providing professional floor care across Toronto and the GTA since 2004, restoring and maintaining commercial floors in offices, schools, medical facilities, retail stores, and government buildings.

Floor stripping and waxing is a multi-step process. The old wax finish — often yellowed, discoloured, and built up from months or years of previous applications — is chemically stripped and machine-scrubbed away. The bare floor is then cleaned, neutralized, dried, and finished with multiple coats of commercial-grade wax applied in thin, even layers. The result is a uniform, high-gloss finish that looks brand new and provides a durable protective barrier against the day-to-day wear of foot traffic.

Floor Types We Service in Toronto

Different commercial floor types require different care approaches — and CMG Clean has the expertise and equipment for all of them:

  • VCT (Vinyl Composition Tile) — the most common commercial floor in Toronto offices, schools, and medical facilities; strip and wax restores gloss and fills surface micro-scratches
  • Vinyl Plank & Sheet Vinyl — no-wax vinyl floors benefit from specialized floor finish products that protect without buildup
  • Linoleum — traditional linoleum in older Toronto buildings requires compatible finish products and careful stripping chemistry
  • Hardwood — commercial hardwood in Toronto offices and retail floors polished and buffed to restore lustre without harsh stripping chemicals
  • Marble & Natural Stone — crystallization, polishing, and honing services for marble, granite, and limestone floors
  • Terrazzo — deep cleaning, sealing, and high-speed burnishing for terrazzo floors in Toronto institutional buildings
  • Concrete — floor sealing, polishing, and guard application for sealed concrete in warehouses, retail, and lofts

The Strip & Wax Process Explained

A professional floor strip and wax service from CMG Clean follows a structured multi-step process:

  • Furniture & Equipment Removal — all movable furniture and equipment is cleared from the work area
  • Stripping Solution Application — industrial-strength floor stripper applied and left to dwell, breaking down old wax layers
  • Machine Scrubbing — low-speed floor machine with stripping pad removes old finish; edges done by hand
  • Wet Vacuum & Rinse — stripped slurry vacuumed up; floor rinsed with neutralizing solution to stop chemical action
  • Dry Time — floor dried completely before wax application to prevent adhesion failure
  • Wax Application — 3–5 thin, even coats of commercial floor finish applied; each coat dried before the next
  • Final Buff — high-speed burnisher brings final coat to a deep, mirror-like gloss finish

After-Hours Floor Care — Zero Business Disruption

Floor waxing in Toronto commercial spaces is always performed after hours — evenings, overnight, or on weekends — so your business operations are never disrupted. The chemical smell from stripping agents dissipates overnight, and your staff arrives the next morning to a floor that looks freshly installed. CMG Clean coordinates all scheduling directly with your facilities manager or property manager to find the optimal window for your Toronto location.

How Often Should Toronto Commercial Floors Be Waxed?

The right floor care schedule depends on foot traffic and floor type. As a general guide: most Toronto office floors benefit from a full strip and wax once or twice per year, with interim buffing and scrub-and-recoat maintenance quarterly. High-traffic retail floors, school hallways, and medical facility corridors may require strip and wax three to four times annually. CMG Clean will assess your floor during the initial site visit and recommend a maintenance program that keeps it looking sharp year-round without over-stripping.

Showroom Floor Waxing for Car Dealerships

Few commercial floors work harder than a car dealership showroom — thousands of visitors, vehicles rolling on and off display, and OEM presentation standards that demand a mirror finish every single day. High-gloss burnishing, epoxy-safe chemistry, and overnight strip-and-wax cycles are core to our car dealership cleaning services, which pair showroom floor care with service bay degreasing and nightly janitorial across the GTA.

Contact CMG Clean at 647-948-9415 or request a free floor care quote online. We service all commercial floor types across Toronto, Scarborough, North York, Mississauga, Vaughan, Markham, and the entire GTA.

Floors We Do Not Strip and Wax — and Why

Half the value of a floor-care contractor is knowing what not to do. Several common commercial floors are damaged by stripping chemistry, and any quote that offers to strip and wax them should be treated with suspicion:

  • Luxury vinyl tile and plank (LVT/LVP) with a factory urethane wear layer — engineered to be maintained without a sacrificial finish; stripper attacks the wear layer and cannot be undone
  • Laminate — a printed layer over fibreboard; it tolerates neither stripper nor standing water, and swelling at the seams is permanent
  • Site-finished and engineered hardwood — maintained by buffing, screening and recoating with a compatible urethane, never by wax stripper
  • Unsealed concrete and unsealed natural stone — porous surfaces absorb finish unevenly and blotch; these are sealed or densified first, or polished mechanically
  • Rubber flooring — common in gyms and mechanical rooms; solvent-based strippers degrade it, so it is cleaned and maintained with pH-neutral chemistry instead

At the walkthrough we identify what you actually have — which is not always what the building file says — and quote the correct process for it. If your floor should not be waxed, we will say so and price the maintenance it does need.

Slip Resistance: The Part Facility Managers Should Ask About

A high-gloss floor and a safe floor are not automatically the same thing, and slip-and-fall exposure is a real liability for Toronto property and facility managers. Commercial floor finishes are tested under ASTM D2047, the standard test method for the static coefficient of friction of polish-coated flooring surfaces measured on a James Machine — UL certifies floor polishes as slip-resistant on the basis of that test. We use finishes that carry a D2047 result and will supply the product data sheet for your records and your insurer.

Separately, ANSI A326.3classifies hard surfaces by dynamic coefficient of friction (DCOF) under wet conditions. It is worth knowing the distinction: A326.3 classifies the product, it does not assess the in-service slip risk of your building. In practice, entrance matting, spill response, and how often the floor is actually cleaned affect real-world traction as much as the finish specification does — which is why we would rather build a maintenance schedule with you than hand over a gloss reading and leave.

Related Cleaning Services

Floor waxing pairs naturally with our other facility services. Many clients combine our floor stripping and waxing service with carpet cleaning in Toronto, office cleaning in Toronto, and ongoing commercial cleaning in Toronto to keep every surface in the building maintained on a single schedule. Floor waxing is especially popular alongside school cleaning in Toronto (gymnasium and hallway refinishing over school breaks) and medical office cleaning in Toronto (clinic corridors and waiting-room floors).

Frequently Asked Questions

Common questions about floor waxing services in Toronto.

How often should commercial floors be waxed in Toronto?

A full strip and wax two to four times a year, with buffing and recoats in between, suits most Toronto commercial floors. High-traffic spots like retail entrances, clinics, and schools wear faster and need it more often. We will set a schedule around how hard your floor gets used.

What is the difference between floor waxing and floor polishing?

Waxing lays down a protective finish coat. Polishing, or burnishing, runs a high-speed machine over the existing finish to bring up the shine without adding product. Strip and wax goes further: it removes all the old finish first, then rebuilds it from fresh coats. We do all three on Toronto commercial floors and will advise which yours needs.

How long does floor waxing take to dry?

Each coat is usually touch-dry in 30 to 45 minutes, and a full strip and wax with several coats runs four to eight hours including dry time. We schedule it overnight so your Toronto floor is fully cured and ready to walk on when you open.

Do you strip and wax VCT tile floors?

Yes, VCT strip and wax is one of the jobs we do most across Toronto. We pull off the old yellowed buildup, scrub the bare tile, neutralize, and lay several coats of commercial-grade finish for a high-gloss, hard-wearing result.

Which Toronto areas do you provide floor waxing services?

We provide floor waxing and hard-floor care across the GTA — Toronto, Scarborough, North York, Etobicoke, Markham, Vaughan, Mississauga, Richmond Hill, Thornhill, Ajax, Pickering, and Oshawa.

Do you offer stripping and waxing floors as a standalone service?

Yes. Stripping and waxing floors is one of our most requested jobs, and you do not need a wider contract to book it. We can do a one-time wax on a single room or area, or set up a recurring strip-and-wax program across your whole Toronto facility on a schedule that suits you.

Which floors can you not strip and wax?

Several common commercial floors should never be stripped and waxed, and quoting them that way is a red flag. Luxury vinyl tile and plank with a factory urethane wear layer is designed to be maintained without finish — stripping chemistry attacks the wear layer. Laminate is a printed photographic layer over fibreboard and cannot take stripper or standing water at all. Site-finished and engineered hardwood is buffed, screened and recoated, not stripped with a wax remover. Unsealed concrete and unsealed natural stone will absorb finish unevenly and blotch permanently. We will tell you which category your floor falls into at the walkthrough and quote the correct process for it.

How many coats of finish do you apply, and how long before we can use the floor?

Four to five thin coats is our standard for VCT in a commercial setting — thin coats level and cure properly where thick ones stay soft and mark. Each coat needs its own dry time before the next goes down, which is why the job runs overnight or across a weekend. Light foot traffic is generally fine a few hours after the final coat, but the finish continues to harden for several days, so we ask that heavy furniture, rolling carts and floor mats stay off until it has cured. Putting mats down over uncured finish is the single most common way a fresh floor gets ruined.

Why does the floor need a neutralizing rinse after stripping?

Because floor stripper is strongly alkaline, and any residue left behind will attack the new finish from underneath. Skipping or shortcutting the neutral rinse is the most common cause of a strip-and-wax job that looks perfect on day one and then powders, peels or goes cloudy within weeks. We wet-vacuum the stripping slurry, rinse with a neutralizer, and confirm the floor is clean and dry before the first coat of finish goes down.

Will the new finish make the floor slippery?

It should not, and this is worth asking any contractor. Commercial floor finishes are tested for slip resistance under ASTM D2047, the standard test method for the static coefficient of friction of polish-coated flooring surfaces measured on a James Machine — UL certifies floor polishes as slip-resistant on the basis of that test. We use finishes that carry a D2047 result and can supply the product data sheet for your records. Related, ANSI A326.3 classifies hard surfaces by dynamic coefficient of friction; note that it classifies the product rather than assessing in-service slip risk in your building, where matting, spill response and cleaning frequency matter just as much.

What is the difference between burnishing, buffing and scrub-and-recoat?

They are three different levels of maintenance, and mixing them up is how facilities end up over-stripping. Burnishing is a high-speed pass that heats and polishes the existing finish back to gloss — no chemicals, no new coats. Buffing is a lower-speed pass, usually with a cleaner, to lift scuffs. Scrub-and-recoat removes the top layer or two of dirty finish and lays fresh coats over the sound base underneath. A full strip-and-wax takes everything back to bare floor. A well-run program uses burnishing and scrub-and-recoat to postpone full strips, because every strip cycle is hard on the floor.

How is commercial floor waxing priced?

By square footage and condition, not by the hour. The variables that actually move the number are the total area, how many layers of old finish have to come off, how much of the area is edge and corner work that has to be done by hand, how much furniture needs moving, and whether the work has to happen overnight or on a weekend. A floor that has never been stripped costs more on the first cycle than on subsequent ones. You can see our general commercial pricing bands on our commercial cleaning rates page, and we provide a written per-square-foot quote after the walkthrough.

Before you ask anyone for a quote it helps to see what commercial cleaning actually costs — the published bands for nightly, weekly and one-off work.

Once the trades are off site the handover job is site cleanup in Scarborough — debris out, dust down, ready for inspection.

Showrooms, service bays and customer lounges are covered by our auto dealership cleaning programme.

Chair-rental studios and multi-station shops book salon cleaning in Toronto, which works around late appointments.

Our Cleaning Services

Eight services for commercial buildings, from day porters and night cleaning to strip and wax and pressure washing.

Day Porter

Day Porter

Cleaning staff on site during business hours: washroom checks and dispenser refills from your supplies, spill clean-up, and kitchen, lobby and meeting-room resets.

Ask about this service when you request a quote.

Night Cleaning

Night Cleaning

Routine after-hours office and janitorial cleaning: washrooms, kitchens, floors, garbage and recycling, done after your team leaves.

Learn more
Carpet Cleaning

Carpet Cleaning

Hot-water extraction and spot treatment for office and commercial carpets, scheduled outside business hours.

Learn more
Post-Construction Cleaning

Post-Construction Cleaning

Rough, final and touch-up cleans after construction, fit-outs and renovations, so the space is ready for handover.

Learn more
Warehouse Cleaning

Warehouse Cleaning

Floor sweeping and scrubbing, dock areas, dust control, and staff washrooms and lunchrooms for warehouses and distribution sites.

Learn more
Strip and Wax

Strip and Wax

Floor stripping and waxing for vinyl tile and other resilient floors: old finish removed, floor neutralized, new coats applied.

Learn more
Pressure Washing

Pressure Washing

Pressure washing for hard surfaces at commercial properties, such as entrances, walkways and loading areas.

Ask about this service when you request a quote.

Fogging and Disinfecting

Fogging and Disinfecting

Fogging and surface disinfection with Health Canada DIN-registered products for offices, clinics, schools and other commercial spaces.

Learn more

CLIENT SUCCESS STORIES

Voices of Satisfaction

Real results from real businesses. Discover how our cleaning solutions have transformed workspaces across industries.

"CMG Clean adapted to our peak season without missing a beat. Night crews, weekend shifts, everything coordinated seamlessly — our showroom floors have never looked this good."
B

Brandon Kowalski

Store Manager, Prestige Lifestyle Boutique, Thornhill

INDUSTRY

Retail

OUTCOME

Increased customer dwell time and repeat visits by 20%

Contact Us

Have questions about our cleaning services? We're here to help.

Get in Touch

Fill out the form and our team will get back to you within 24 hours with a customized cleaning solution.

Our Location:

10 Milner Business Ct #300, Scarborough, ON M1B 3C6

Business Hours:

Monday - Friday: 8:00 AM - 8:00 PM

Saturday: 9:00 AM - 6:00 PM

Sunday: 10:00 AM - 5:00 PM

Emergency Services Available 24/7

Service Areas:

Serving the entire Greater Toronto Area including Toronto, Scarborough, North York, Vaughan, Markham, and Mississauga.

Ready to Experience Industry-Leading Cleaning?

Contact us for a customized cleaning solution tailored to your specific industry needs. Get started with a free quote today.